Page 90 - CITS - Dress Making - TT - 2024
P. 90
DRESS MAKING - CITS
2 The Internal Commands Button opens a window where you can set the default settings for internals that are
created using the digitizer.
3 The Piece Information Button allows you to modify the piece information for the current piece you are working
on. You can change the piece information one by one as you digitize, or more easily - fix them from within the
PDS workspace.
1 Digitizer status Window
2 Internal Commands Window
3 Piece Information Window
Testing Digitizer Calibration
1 Take an 8.5x11” sheet of paper and tape it to your digitizer board.
2 Digitize around the perimeter of the piece using only four grading, non-curve points total(You can use the
crosshairs on the digitzer puck to be as accurate as possible while digitizing).
3 Click ‘”Done”’ to send the piece to the workspace.
4 Find the Piece, and bring it to the workspace.
5 Press F8 to see the length of each contour between grading points.
Note: The human hand will never be able to perfectly recreate the exact size and shape of any
contour digitzed in. Your measurements can be as far as .1 or even .2” off depending on the size of
your pattern.
75
CITS : Apparel - Dress Making - Lesson 8 & 9 (6)