Page 161 - CITS - Electrician - Trade Practical

ELECTRICIAN - CITS

Table 3
Sl.No V peak Input waveshape V peak Output waveshape
out
in

TASK 4 : Assemble the NON- inverting amplifier circuit using OPAMP 741 and observe the input and
output waveform

1 Draw the circuit diagram.
2 Connect the circuit as per circuit diagram. Refer Fig 4
3 Connect +Vcc 15V to pin 7 and –Vcc 15V to pin 4.
4 Apply the input signal with function generator.

5 Observe the input and output waveforms and record voltage level in Table 4
6 Plot the input and output waveform.

Fig 4

Table 4

Sl.No V peak V peak
in out

TASK 5 :Assemble the integrator circuit using OPAMP 741 and observe the input and output waveform
1 Draw the circuit diagram.
2 Connect the circuit as per circuit diagram. Refer Fig 5
3 Connect +Vcc 15V to pin 7 and –Vcc 15V to pin 4.
4 Apply the input signal with function generator.
5 Observe the input and output waveforms and record voltage level in Table 5

6 Plot the input and output waveform.
Table 5

Sl.No Vin peak Vout peak

144

CITS : Power - Electrician & Wireman - Exercise 68