Page 127 - Electronic Mechanic - TP - Volume - 2

ELECTRONICS MECHANIC - CITS

3

Connect the CCTV cables video lead to the Connect the CCTV cable video and power
DVR in each video input port as required. lead to the camera leads.(marked for
Ensure you use the connector marked “For camera use only).
DVR side only”.

4
The cameras are powered via the18m CCTV cables supplied.The cable carries both the power to the camera,
and the video feed from the camera to the DVR. This setup allows you to powerup to 8 cameras from a single
power socket.
Connect the CCTV Cable(s) power lead(s) to the splitter cable, then connect the splitter cable to the camera
power supply.

5
The system is now fully connected and the power supplies can be connected to the mains.This example uses
a VGA connection:
Note : the port layout pictured above may differ from your DVR depending on model

110

CITS : E & H - Electronics Mechanic - Exercise 150