Page 188 - Electronic Mechanic - TP - Volume - 2
P. 188
ELECTRONICS MECHANIC - CITS
Different Parts of Vaccum Cleaner
Problem Possible cause Solution
Bags and filters too full or blocked Unplug equipment, check, or
replace
My vacuum cleaner has no suction filters/ bags and clean out.
Hoses and attachments are Unplug equipment, check the
blocked hoses/ attachments, and clean out.
Damp bag, offensive contents, Empty contents of reusable bag
bags not emptied regularly and clean bag. Replace disposable
bag. Air out the bag by placing in
the sun.
Schedule a set day to clean
My vacuums smells reusable bags.
Overheating motor (burning smell) Let the machine cool down. Check
filters for blockages and clean
filters.
If it persists, contact your
Supervisor.
RCD Tripped Test the RCD and if it fails,
isolate the machine, and call your
Supervisor.
Batteries have run out of charge Check battery, recharge battery.
Power failure Check power point, connections
and mains power.
My machine will not turn on or
randomly stops working and has Overheating of the motor Unplug the equipment and let it
no power cool down. Check bags, filters and
fittings are clear.
Damaged Vacuum power cord and Turn the equipment off at the
extension leads socket. Check the cord for
damage. If so, immediately place
an out of service tag and call your
Supervisor.
171
CITS : E & H - Electronics Mechanic - Exercise 166
