Page 248 - Electronic Mechanic - TP - Volume - 2

ELECTRONICS MECHANIC - CITS

Analog Output Devices
1 Analog Voltage Output Modules: Some modules are designed to output analog voltage signals. They typically
have an analog output pin (AO), ground (GND), and possibly a Vcc pin. Wire the analog output pin to the input
of the device you want to control with the analog signal. Connect the GND pin to the ground of your circuit.
2 Digital-to-Analog Converters (DACs): DACs are used to convert digital signals into analog voltages. Follow the
datasheet of your DAC module to determine the wiring specifics. Typically, you’ll connect the digital input pins
to your microcontroller or digital output module and the analog output pins to the device you want to control.

Note: Double-check the voltage and current requirements of your devices and modules to avoid damaging
them.

Result: Thus the Wiring from PLC to the respective I/O modules have been performed successfully.

231
CITS : E & H - Electronics Mechanic - Exercise 182