Page 137 - CITS - Fashion Design Technology - Trade Practical

FASHION DESIGN & TECHNOLOGY - CITS

6 Cut a design out of a sponge using scissors and dip the soft side lightly into fabric paint. Be sure to press
down firm and straight on the fabric as shown in the figures.

Note: Get the work checked by your Instructor.

Prepare fabric samples with Quilting

At the end of this exercise, you will be able to:
• prepare fabric samples with quilting.

Requirements

Tools/Instruments
• Sewing Machine • Fabric Carbon
• Scissors • Fabric
Materials • Wadding Materials
• Cartridge Paper • Sewing Thread
• Dress Maker’s Pins
• Pencil • Contrast colour fabric for binding the edges
• Eraser

Procedure

TASK 1: Prepare fabric samples samples with Quilting
1 Draw the required design suitable for quilting in a cartridge paper.
2 Cut the fabric, Lining and Wadding/Filling material in equal sizes.
3 Transfer the design on the right side of the fabric using fabric carbon.
4 Place the lining with wrong side facing and above that place the wadding material.

5 Over that place the fabric on right side facing.
6 Secure all the layers with the help of dress maker’s pins.
7 Put edges stitches in all the four corners with the help of a sewing machine.
8 Apply machine stitches on the design lines.

9 Complete sewing and apply suitable binding at the edges for decoration.
Note: You can used hand striches nearly also instead of machine stricher.

122

CITS : Apparel - Fashion Design & Technology - Exercise 4