Page 21 - CITS - Fashion Design Technology - Trade Practical

FASHION DESIGN & TECHNOLOGY - CITS

Fig 5

14 Move the pattern on the increments line for both the x and y direction for point 4 and mark the end of the Arm-
hole and start of the side seam line.
15 Return back the pattern to origin point on the paper.
16 Move the pattern on the increments line for both the x and y direction for point 5 and mark the end of the side
seam line and end of the Waist line.
17 Return back the pattern to origin point on the paper.
18 Move the pattern on the increments line for both the x and y direction for point 6 and mark the start of the Waist
line and end of the CF line. (Fig 6)

Fig 6

19 Remove the pattern from the paper, and join the graded portions with the help of scale (for straight lines) and
base ‘S’ pattern (for curves). (Fig 7)
20 Do the same procedure for the remaining sizes for getting graded patterns for all the sizes as shown in the
figure. (Fig 8)

Fig 7

6

CITS : Apparel - Fashion Design & Technology - Exercise 1