Page 32 - CITS - Fashion Design Technology - Trade Practical
P. 32
FASHION DESIGN & TECHNOLOGY - CITS
Fig 1 Fig 2
TASK 3: Manipulate waist dart to mid-neck dart (Fig 1)
1 Place the working pattern on paper with a push ping through bust point. (pivotal point)
2 Mark mid-neck location (point c) and dart leg A on a paper. (Fig 2)
3 Trace section of pattern from dart leg A to C, by following till the arrow mask ends from the, bust point.
4 Pivot pattern until dart leg B touches A on paper. (close waist darts and open space for mid-neck dart.)
5 Trace remaining section of the pattern from dart leg B to point C on pattern by following the arrow marks.
Whenever the pattern is pivoted, it will over lay the previously traced pattern section. This is a natural
occurence. Remember, once a section of the pattern is traced, it is not traced again. (Fig 3)
6 Remove the working pattern from paper.
7 Draw dart legs to bust point.
8 Mark centre dart point 1/2 inch from bust point.
9 Redraw the dart legs to dart point.
10 Cut in muslin for test fit.
17
CITS : Apparel - Fashion Design & Technology - Exercise 1
