Page 62 - CITS - Fashion Design Technology - Trade Practical

FASHION DESIGN & TECHNOLOGY - CITS

Fig 10 Fig 11

13 Add seam allowance 1 cm each at the neck curve and shoulder. Add 1.5 Cms. as seam allowance at the arm-
hole and side seam for overlock and 4cms. at the bot- tom as hem allowance. .
14 Open the pattern in the fold line

15 Save the file in the proper folder. (Fig 12).
Fig 12

TASK 3: Create pattern for a ‘T’ Shirt Sleeve.
1 Create a Rectangle of 21 cms,. length ( Sleeve length) and 20 Cms. width (Armhole length).
2 Mark points 1,2,3 & 4. (Fig 13).

Fig 13

3 Mark point 5 from point 1 with the distance of 4 cms (Crown height).
4 Mark point 6 from point 3 with the distance of 14 Cms. (Half of Sleeve opening).
5 Delete points 1 & 2. (Fig 14).

6 Mark curve point 7 at the mid level of 4-5. (Fig 15)
7 Move curve point 7 and make 4-5 as smooth curve.
8 Also mark curve point 8 near point 5 at the distance of 3 cms. (Fig 16).
9 Move point 8 and make a smooth curve. (Fig 17).
10 Open the pattern in the fold line. (Fig 18).
11 Select the cut tool and select the line 3-4. (Fig 19).

12 Select the selection tool. Click the top part of the sleeve and drag. (Fig 20).

47

CITS : Apparel - Fashion Design & Technology - Exercise 2