Page 24 - CITS - Fitter Trade Pactical - Volume - 2

FITTER - CITS

EXERCISE 4: Introduction of disposal procedure of

waste materials like cotton waste, metal
chips/burrs etc

Objectives

At the end of this exercise you shall be able to
• identify and segregate the waste material in workshop
• arrange the waste materials indifferent bins.

Job Sequence

Fig 1

Fig 2

• Separate the cotton waste.
• Collect the chips by hand shovel with the help of brush.

• Clean the floor, if oil is spilled.
• Separate the cotton waste material and store it in the bin provided to store the waste cotton material.
• Similarly store the each category of metal chip in separate bins.

Note: Do not handle the chip by bare hand
There may be different metal chips. So, separate the chip according to metal.
Each bin should have name of the material.

9