Page 160 - CTS - Mechanic Diesel - TP

MECHANIC DIESEL - CITS

Fig 1 Fig 2

TASK 2: Dismantle the starter motor
1 Remove the through bolts.
2 Take off the commutator end housing (2) (Fig 1)
3 Remove the brush holder cover from the brush holder.
4 Take out the brush springs and brush.

5 Remove the yoke assembly.
6 Remove the armature (2) along with the pinion drive lever(1).(Fig 2)

Fig 1 Fig 2

7 Insert the screwdriver tip in the gap between the two stop collars (1) and (2). (Fig 3)
8 Push the front collar (1) outward.

9 Using a 14mm socket (3) push the rear stop collar (2) downwards.(Fig 4)
10 Remove the armature snap ring (4)by using a snap ring plier, and with the help of a screw driver.(Fig 5)
11 Pull out the rear pinion stop collar (2),and over-running clutch (5). (Fig 5)

143

CITS : Automotive - Mechanic Diesel - Exercise 9.2