Page 304 - CTS - Mechanic Diesel - TP

MECHANIC DIESEL - CITS

Fuel filter

10 Check the continuity between power supply and ground terminal when water level sensor is immersed in water
and Diesel Fuel . It should show continuity while immersion in water and no continuity for immersion in fuel. If
not, replace the water level sensor.

11 Remove fuel temperature sensor.
12 Check resistance between fuel temperature sensor terminals at different temperatures of fuel and compare
with the service manual reference value. If the values are out of specification, Replace the fuel temperature
sensor.
13 Clean the filter casing. Dry and wipe out the filter case.
14 Tighten the bleed screw.

287

CITS : Automotive - Mechanic Diesel - Exercise 17.1 CITS : Automotive - Mechanic Diesel - Exercise 17.1