Page 250 - CTS - Sewing Technology - TP - Volume - 2-0

SEWING TECHNOLOGY - CITS

Fig 1

TASK 2: Thread the button stitching machine (Fig 1)
1 Start threading from the spool to thread guide 1 and 2.
2 Rotate the thread into tension disc in clockwise direction3 and 4.

3 Put the thread into thread guide 5, 6, 7, 8, 9, 10 and11, 12, 13.
4 Thread the 14th thread guide bring to spring 15, 16, 17and 18.
5 Before threading into needle pass the thread 19 and 20 guide, 21 thread the needle thread from front to back

Fig 1

TASK 3: Adjust the stitch length (Fig 1)
Length wise feed
1 Length wise feed push down the adjusting lever as shown in Fig 1 Pt:1.
2 Set the feed to ‘0’ for 2 holes buttons (0) 4 holes buttons
Cross wise feed

Loosen nut as shown in Fig 3 Pt: 2 and set section (a) of pointer (3) to a corresponding amount. Then tighten nut
(2) for cross wise feed.

235

CITS : Apparel - Sewing Technology - Exercise 36 CITS : Apparel - Sewing Technology - Exercise 36