Page 286 - CTS - Sewing Technology - TP - Volume - 2-0

SEWING TECHNOLOGY - CITS

3 Place the top & bottom cuff one top another attach the 2 cuff components using SNLS machine and during
the stitch of corner put the thread to get a sharp point cuff. (Fig 3)

Fig 3

4 Turn the cuff components and press with iron box before attaching to the sleeve. (Fig 4)
Fig 4

5 Joint the cuff with sleeve by using distance stitch with help of ¼” seam allowance (attach the cuff reverse side
of the body). (Fig 5)

Fig 5

6 Turn the cuff to face side close the cuff components with edge stitch and finish with cuff top stitch (only start
& end with one back tack introduced). (Fig 6)

Fig 6

TASK 9 : Collar marking

1 Place the fusing collar fall the reverse side of the collar ensure allowing 1/4” allowance and press the collar
falls. (Fig 1)

Fig 1

2 Press the collar band by following above procedure. (Fig 2)

Fig 2

271

CITS : Apparel - Sewing Technology - Exercise 38 & 39 CITS : Apparel - Sewing Technology - Exercise 38 & 39