Page 293 - CTS - Sewing Technology - TP - Volume - 2-0

SEWING TECHNOLOGY - CITS

TASK 4: Sew the pathani kurta
- Take the front part and stitch Two-piece placket in the centre front.

- Join the front and back parts together at their shoulders with a seam and topstitch it.
- Prepare chest pocket (Patch pocket) and attach it on both the left side and right side of front part on the
marked line.

- Fix fusing to the fabric of collar. Prepare both the band and collar. Stitch the collar fall with the band pieces
and prepare Shirt collar.
- Attach the prepared collar to the neckline.

- Attach sleeve on armhole with shirt - sleeve method.
- Stitch under arm seam and side seam matching the balance marks, leaving the pocket - mouth and slit on
the marks.

- Stitch and finish Kurta pocket at both sides.
- Finish slit and bottom by hand hemming.
- Divide the placket length into four equal parts from collar and mark button hole positions on the centre of
placket
- Mark, cut and work out button holes.
- Tack buttons of appropriate size on the button stand placket.

- Finish and press

TASK 5: Finishing of pathani shirt
After stitching a Pathani shirt, the finishing process adds the final touches to enhance its appearance and
functionality.

- Trimming is the operation of removing the extra threads to achieve a neat look to the garment
- Checking and removing of stains in the garment using wetting agents.
- Checking of stitching faults if any and to rectify it.
- Checking for final measurement as per spec-sheet.

- The last process is pressing. The pathani shirt has to be pressed for removing wrinkles and to enhance its
appearance. (Fig 1)

Fig 1

278

CITS : Apparel - Sewing Technology - Exercise 38 & 39