Page 68 - CITS - Dress Making - TT - 2024

DRESS MAKING - CITS

• Mms: To work in Millimeters.
• Cms: To work in Centimeters.
• Inches: To work in Inches with decimal format.
• Inches (8): To work in Inches with fraction of 1/8th’s format.
• Inches (16): To work in Inches with fraction of 1/16th’s format.

• Inches (32): To work in Inches with fraction of 1/32th’s format.
• Inches (64): To work in Inches with fraction of 1/64th’s format.
Material (Ctrl + 2): It is used to create a new type of material for the piece to be created.
Style (Ctrl + 3): It is used to describe all the style details. Here you can enter Style Name, Base Size, Client,
Season, Order Number and Unit for printing purpose.

Piece (Ctrl + 4): It is used to create or modify the Attributes of pieces you have created. You have to define the
Number of Cuts/Copies you want in Marker, Material, Way, Flip X, Flip Y, annotation for each piece as shown in
dialog box.

• Snap (Ctrl + 5): It is used to setup distance in pixels between the Cursor and the selected point or internal or
notch etc.

- Normally Snap Selection value for all attributes of the pieces is 10 pixels. That is when cursor is at a
distance of 10 Pixels it sticks to the particular attribute e.g. tracing point, Pattern Point, Tracing Segment,
etc.
- If you increase these pixels value you cannot select the required one, as all the attributes will be close by
in patterns or Tracings. If you decrease these pixels value then you cannot select the point. Take the cursor
exactly on the screen. To overcome these snap distance and snapping of point attributes use CTRL Key/
SHIFT Key to click or select these points.

53

CITS : Apparel - Dress Making - Lesson 8 & 9 (3)