Page 198 - CITS - ED - Mechanical
P. 198
ENGINEERING DRAWING - CITS
Draw a solid pulley
Excercise 1: Solid flat pulley (disc type) using by CAD
Sketch two views of solid flat pulley of disc type made of C.I the outer diameter is 200 mm width 72 mm and shaft
diameter 32 mm. (Fig 1)
Fig 1
Excercise 2: Solid flat pulley (for arms) by using CAD
Draw the cast iron flat pulley has outer dia 240 mm and width 80 mm If the pulley has four arms and shaft size is
32 mm draw half section elevation and side view of pulley. (Fig 2)
Fig 2
Excercise 3: Solid flat pulley (six arm types)
Draw the below mentioned solid that pulley (six arm type) in proportional dimensions. (Fig 3)
185
CITS :Engineering Drawing (Mechanical) - Exercise 9 CITS :Engineering Drawing (Mechanical) - Exercise 9