Page 146 - CITS - Electrician - Trade Practical

ELECTRICIAN - CITS

EXERCISE 62 : Check the different wave shape using CRO

Objectives

At the end of this exercise you shall be able to
• identify the various controls of the function generator
• operate the function generator and set the required frequency and wave form
• measure the time and frequency of the set waveform using CRO.
Requirements

Tools/Equipments/Instruments
• 30 MHz oscilloscope dual Trace -1 Nos.
• Function generator -1 Nos.

Procedure

TASK 1: Identify the various controls of the function generator
1 Write functions of function generator controls

Sl.no Description Function
1 Coarse knob

2 Fine knob

3 Freq.range buttons
4 Duty cycle knob

5 INV button

6 Function buttons
7 ATTN button

8 SYNC terminal
9 DC Offset knob

TASK 2: Operate the function generator and set the required frequency and wave form
1 Switch ON the function generator
2 Set the wave shape of the function generator to sine wave (refer Fig1) and record in Table 1
3 Set the range of frequency in function generator to 10kHz

129