Page 135 - Electronic Mechanic - TP - Volume - 2
P. 135

ELECTRONICS MECHANIC - CITS



           EXERCISE 153: Dismantle  DVR  and  Demonstrate  major

                                      functional  blocks and  test  for  the

                                      healthiness



            Objectives

           At the end of this exercise you shall be able to
           •  on-board software, such as video analytics
           •  image protection /authentication techniques
           •  ports for additional recording capabilities
           •  internal hard drive for video storage
           •  ability to easily search for and locate event
           •  ability to record one or more camera Inputs while performing video analytics.
           •  removable hard drive for archiving purposes
           •  ability to transfer data to expendable storage systems called redundant Array of Independent Disks (RAID) to
              Free up recording space. DVR installation.


           Requirements

           Tools/ Materials
           •  DVR/ NVR
           •  Screw driver set
           •  Wire stripper

            Procedure


           1  Analog CCTV
              A CCTV system may send Digital or analog video to the recording system. A DVR receiving analog video
              takes two fields of the analog signal and builds one image, which is then digitized and compressed. If the
              video going to the DVR is digital, it is normally compressed to save storage  space. Various data compression
              methods can be used that offer verifying  degrees of performance, quality, and capabilities such as:-
           2  Digital CCTV / IP system
              Some basic Component of different CCTV system are belo:-

              •  Security Camera: Security Cameras captures the video of the source. It is an essential of any CCTV
                 system. Every camera has three basic elements:
           a faulty DVR unit

           1  Prepare Your Tools and Equipment. ...
           2  Power Off and Unplug. ...
           3  Open the DVR Case. ...
           4  Locate the Hard Drive. ..
           5  Disconnect the Cables. ..
           6  Remove the Faulty Hard Drive. ...

           7  Install the New Hard Drive. ...
           8  Reconnect Cables.




                                                           118
   130   131   132   133   134   135   136   137   138   139   140