Page 198 - Electronic Mechanic - TP - Volume - 2

ELECTRONICS MECHANIC - CITS

STEP 7: Tearing Down Iron Sole Plate.
Remove the screw with a screw driver, which keeps together the sole plate and the housing cover for it.
There should be 2 screws on either ends of the bottom plate.
The second picture shows what the sole plate will look like when this step has been executed.
STEP 8: Contact Strip Removal.

Next remove the 2 screws which attaches the contact strips of the sole plate.
The location of the 2 screws are highlighted in image 2.

STEP 9: Upper Casing Removal.
Carefully pry the upper casing off to reveal the circuit board.
The casing may be difficult to remove, use a flat tool like a chisel or flathead screwdriver to act as a lever, gently
lifting the casing off.

181
CITS : E & H - Electronics Mechanic - Exercise 169