Page 203 - Electronic Mechanic - TP - Volume - 2

ELECTRONICS MECHANIC - CITS

STEP 3: Spray Button Removal.

Pull out the spray and steam button from the iron. This should be able to do through a bit of force.
Tip: if it is not coming out easily, a little wiggle would help in pulling out the buttons.
Try not to twist the buttons around too much as it may snap from excessive force.
STEP 4: Back Portion Removal.

Remove the back plastic piece of the clothes iron through carefully prying it off with a chisel.
Warning: As this piece is quite fragile, it can snap easily during this step.
The second image displays what the back cover looks like when removed.

STEP 5: Removing Upper Casing.
Using a small pin, carefully pry out the rubber plug used to keep the crew underneath from rusting.
Then using a screw driver, remove the screw underneath the plug. You should then be able to remove the upper
portion of the clothes iron.
STEP 6: Mid Casing Removal.
After removing the screw in the prior step, gentle pull the upper portion of the clothes iron apart.
The casing should now be released from the sole plate.

The second photo displays what it should look like when this step has been executed.

STEP 7: Tearing Down Iron Sole Plate.
Remove the screw with a screw driver, which keeps together the sole plate and the housing cover for it.
There should be 2 screws on either ends of the bottom plate.

The second picture shows what the sole plate will look like when this step has been executed.

186

CITS : E & H - Electronics Mechanic - Exercise 170.2 CITS : E & H - Electronics Mechanic - Exercise 170.2