Page 227 - CITS - Fashion Design Technology - Trade Practical
P. 227

FASHION DESIGN & TECHNOLOGY - CITS




           3   Joint P and Bust Point. Now Slash the line from Point P up to Bust
















           4  Now close the side dart and open the dart at the point P. Trace in a new paper and
              correct the darts apex points ¾” from the bust point. Complete the pattern.
















           TASK 4: Manipulate Mid-neck and Waist Dart - Pivotal Transfer Technique
           1  Trace pattern which completed in task 1 of this exercise.
           2  Now place the pattern on a paper. Place push pin at the bust point. Mark Point P
              at the mid level of the neck. Also Mark the points Q and R at the side seam dart
              legs as shown in the figure.









           3  Now, Trace the dart leg from the point R to the apex point on the paper. Also, trace
              from R to bottom waist dart, Center Front Line and neck curve up to the point P.
           4  Rotate the patten in anti clock wise direction that the point Q exactly meets on
              point R. (now the side seam Mark the new point P as shown in the figure.

           5  Mark the new point P as shown in the figure.







           6  Trace the remaining portion of the pattern i.e., from Point P, the neck curve up
              to shoulder, shoulder line, arm hole and the side seam from armhole to points Q
              and R.
           7  Now draw the new dart from the bust point at the neck. .
           8  Reduce the dart length ¾” from the Bust point. Complete the pattern.








                                                           212

                                CITS : Apparel - Fashion Design & Technology - Exercise 13
   222   223   224   225   226   227   228   229   230   231   232