Page 228 - CITS - Fashion Design Technology - Trade Practical

FASHION DESIGN & TECHNOLOGY - CITS

TASK 5: Manipulate Shoulder-Tip and Waist Dart by pivotal transfer technique
1 Trace pattern which completed in task 1 of this exercise.
2 Now place the pattern on a paper. Place push pin at the bust point. Mark Point P
at the Shoulder tip near armhole. Also Mark the points Q and R at the Side seam
dart legs as shown in the figure.

3 Now, Trace the dart leg from the point R to the apex point on the paper. Also,
trace from R to bottom waist dart, Center Front Line , neck curve and shoulder
line up to the point P.
4 Rotate the patten in anti clock wise direction that the point Q exactly meets on
point R. (now the side seam dart has been closed and dart is opened at the
shoulder tip)
5 Mark the new point P as shown in the figure.

5 Trace the remaining portion of the pattern i.e., from Point P, armhole and side
seam up to the point Q.
6 Now draw the new dart from the bust point at the shoulder tip. .
7 Reduce the dart length ¾” from the Bust point. Complete the pattern.

Note: Get the work checked by your Instructor.

213

CITS : Apparel - Fashion Design & Technology - Exercise 13 CITS : Apparel - Fashion Design & Technology - Exercise 13