Page 248 - CITS - Fashion Design Technology - Trade Practical
P. 248

FASHION DESIGN & TECHNOLOGY - CITS





              0 -1 =  Full length.
              0-2  = Armscye Depth.
                0-3  = Waist Length.
               3-4 = Waist to Hip

              2-5 = Half of 0-2 or as desired.
              2-6 = 1/4th Bust Plus ease and seam.
                 3-7 = 1/4th Waist plus ease and seam.
              4-8 = 1/4th Hip plus ease and seam.
              1-9 = Equal to 4-8 or the measurement of (4-8) plus flare.
              5-10 = ¾ of the measurement of (2-6) or as desired.

              6-11 = 1 ½”.
              Shape 10-11-6-7-8-9 as shown. This is front.
              For Back, Trace the Front Draft.
              2-12 = Mid of (2-3) or as desired. Shape 11 and 12.  Remove the top portion above the line 11-12.   Add
              required seam allowances.


           2  Cut the patterns in fold. While cutting, place the pattern on the fabric in True Bias as shown in the following
              figures. (We can add facing portion also while drafting the Front and  back patterns as shown in the figure).


















































                                                           233

 CITS : Apparel - Fashion Design & Technology - Exercise 15  CITS : Apparel - Fashion Design & Technology - Exercise 15
   243   244   245   246   247   248   249   250   251   252   253