Page 245 - CITS - Fashion Design Technology - Trade Practical
P. 245

FASHION DESIGN & TECHNOLOGY - CITS


            Prepare patterns for various styles of Collars
           At the end of this exercise, you will be able to
           •  prepare patterns for collar for V neck
           •  prepare patterns for Chinese collar
           •  prepare patterns for Collar with stand
           •  prepare patterns for all in one collar and stand.

           Requirements

           Tools/Instruments

           •  Measuring tape                 - 1 No.           •  Push pins                       - as reqd.
           •  Scissors                       - 1 No.           •  Ladies’ bodice block front and back
           •  L-Scale ruler                  - 1 No.              pattern size back pattern size   - 12 (M-Small)
           •  Ruler paper for patterns       - 1 No.           •  Pattern table                   - 1 No.
           •  Pencil or Pen                  - 1 No.           •  Pattern shears                  - 1 No.
           •  Metal weights                  - 1 No.           •  Bell pins and push pins         - 1 No.
           •  Tracing wheel                  - 1 No.           Materials
           •  Awl                            - as reqd.        •  Brown papers                    - as reqd.

           Procedure

           TASK 1: Prepare patterns for Collar for V neck
           1  Place front and back patterns together on the paper, matching shoulder at neck.  Overlap shoulder tips by 1/2
              inch. Design and develop collar as illustrated.  Cut collar from bodice. To complete bodice pattern, trace and
              trim P-Q section.  Trace collar and modify for undercollar.
























           TASK2: Prepare patterns for Chinese Collar












           Draw a straight line PQ = 1 ½”. Draw a  perpendicular line QR from PQ. QR = Sum of Front and Back neck. QS
           = Centre Back to Shoulder measurement. Mark a notch at S. Draw a perpendicular line from R and mark RT =
           ½”. Draw a curved line from S to T as shown. And shape the line Q-S-T. Shape the line UT with the measurement
           of  1 ½”. Now draw the line P-U parallel to Q-T as shown in the following figure. Cut the pattern in fold. Add seam
           allowance and mark the grain line.



                                                           230

                                CITS : Apparel - Fashion Design & Technology - Exercise 15                                                             CITS : Apparel - Fashion Design & Technology - Exercise 15
   240   241   242   243   244   245   246   247   248   249   250