Page 241 - CITS - Fashion Design Technology - Trade Practical
P. 241
FASHION DESIGN & TECHNOLOGY - CITS
3 Fold on the P-Q line and trace the shoulder.Draw and trace the facing (1 ¼” wide at shoulder). Unfold and draw
the traced facing. Draw the bias grain line and cut from paper.
4 Trace the basic back block pattern. Mark P, 1 ½” below CB. Mark Q, ¼” down from the mid-shoulder. Draw the
neckline from P curving the line to Q. Extend a parallel line from CB. Draw a straight grain line. Prepare the
facing also.
TASK 2: Prepare patterns for style with Back Cowl
1 Trace the bodice Back block in a paper. Mark P, 4” down from the back neck. Mark Q at the dart legs at mid
shoulder. Measure from P to Q and record. Mark R from CB Waist equal to the width between the dart legs.
2 Cut a 36” square of paper, and fold. Square a line from the fold that equals the P-Q measurement and label.
Place the pattern on the paper so that points Q of the pattern and paper touch and point R touches the fold.
Secure and trace the pattern indicated by the bold line, omitting the part indicated by broken lines. Remove the
pattern. Square a short line at R and draw a curved waistline. Draw a slightly curved line from Q to shoulder
tip. Mark S 3 inches up from P. Crease-fold paper on P-Q line. Trace shoulder.
3 Crease-fold paper on P-Q line. Trace shoulder. Unfold. Draw 1 ¼” of shoulder and shape to point S for fold-
back facing. Cut pattern from paper. Unfold. Draw bias grain line. Adjust shoulder in Front Block also.
Note: Get the work checked by your Instructor.
226
CITS : Apparel - Fashion Design & Technology - Exercise 15 CITS : Apparel - Fashion Design & Technology - Exercise 15