Page 261 - CITS - Fashion Design Technology - Trade Practical
P. 261
FASHION DESIGN & TECHNOLOGY - CITS
9 Now, Trace the Bodice Block Back Pattern and Mark Point ‘b’ 1 ¼” from the shoulder tip on the shoulder line.
Mark the point ‘a’ 3” down from the CB neck point. Shape a-b as shown and cut the shaded portion as shown
in the figure.
10 Trim the shoulder by ¼” at the neck side.
11 Then, prepare the patterns for the puff sleeve.
Note: For extending the Length of the garment up to hipline also, trace Body and Skirt block up to
Hip line and apply slash and spread method for gathering up to Hip line in the Front Part.
TASK 2: Cut and Sew a Designer’s Skirt.
1 Cut the required parts of the garment using open lay out method.
2 Prepare the gathering in the Front and join in the CF.
3 Prepare the Back plackets.
4 Finish the Front and Back neck seam by facing.
5 Join the Front and Back in Shoulder seam.
6 Close the side seam.
7 Finish Sleeve bottom hem and attach with the body.
8 Finish the bottom with Band.
9 Finish the garment by attaching the required fasteners.
Note: Get the work checked by your Instructor.
246
CITS : Apparel - Fashion Design & Technology - Exercise 17