Page 266 - CITS - Fashion Design Technology - Trade Practical

FASHION DESIGN & TECHNOLOGY - CITS

3 Now Join the ends and shape the sides for making a single gore as shown in the figure.
4 Now, trace three copies of the gore panel side by side. Mark the central gore waist as (7-8). Draw a straight
line from 8 to dart end point and it will meet 2 at the hipline.
5 Draw perpendicular lines half way from the bottom centre of each gore as shown in the figure.
6 Mark point 4 at the centre line of the central gore in which line 2-4 equals to 2-8.
7 Measure 4 to 4A and apply on the mid line of the third gore to find the point 6.
8 Follow the same procedure for the points 1,3 and 5. Shape the hem line 5-6.
9 8-10 and 9-10 = 2”. This is applied for high waist. Join 7-9.

10 Cut the panel 9-10-8-2-4-6-4A-5-3-1-7-9 as shown in the following figure. Add the required seam allowance.
Cut 10 no. of panels.

11 Prepare patterns for waist band.

TASK 2 : Cut and Sew a Designer’s Skirt
1 Cut the required parts of the garment using open lay out method.
2 Join all the panels using sewing machine.
3 Construct the side zipper placket.
4 Joining the side seams.
5 Do the bottom hem.
6 Attach the waist band.
7 Finish the garment by attaching the required fasteners.
Note : Get the work checked by your Instructor.

251

CITS : Apparel - Fashion Design & Technology - Exercise 19