Page 271 - CITS - Fashion Design Technology - Trade Practical
P. 271

FASHION DESIGN & TECHNOLOGY - CITS


           Skill Sequence


           Attach Yoke
           At the end of this exercise you will be able to:
           •  fix yoke on back.

           Procedure

           1  Set 2 reverse pleats on marks and baste.
           2  Match raw edges of one yoke piece (neckline down) with back on notches of centre front lines, wrong side of
              back and right side of yoke together. (Fig 1)
           3  Take other yoke piece and place it on back piece with right sides and upper raw edges together. Stitch.
              (Fig 2)

             Fig 1                                           Fig 2






















           4  Turn lower part of inside yoke (neckline on top) and stitch seam allowance to inside yoke. (Fig 3)
           5  Join lower yoke with front bodice on shoulder line. Stitch on both shoulder lines leaving seam allowance.
               (Fig 4)

             Fig 3                                           Fig 4
























           6  Turn the raw edge of upper yoke at shoulder line by 0.75
           7  cm. Place over seam allowance of lower yoke and stitch with top stitch. (Fig 5)





                                                           256

                                CITS : Apparel - Fashion Design & Technology - Exercise 21
   266   267   268   269   270   271   272   273   274   275   276