Page 162 - CITS - Fashion Design Technology - Trade Theory
P. 162
FASHION DESIGN & TECHNOLOGY - CITS
Fig 1
Polo shirt Drafting
ack Pattern
• Make a construction line
• A to B – ¾ of an inch downward.
• A to C – 4 to 4 ½ inches downward.
• A to D – ½ armhole circumference plus 1 inch.
• A to E - measure back figure
• A to F – measure shirt length
• Square point B, C. D, E, and F sideward.
• A to G – 3 inches sideward.
• Connect point B and point G with a French curve shaping the neckline.
• A to H – ½ shoulder measurement.
• A to I – ½ chest width measurement or less ½ inch from the shoulder measurements.
• A to J – ¼ of bust circumference measurement.
• H to K – 1 inch downward.
• Connect point G and point K with a straight line.ack Pattern
• Make a construction line
• A to B – ¾ of an inch downward.
• A to C – 4 to 4 ½ inches downward.
• A to D – ½ armhole circumference plus 1 inch.
• A to E - measure back figure
• A to F – measure shirt length
• Square point B, C. D, E, and F sideward.
• A to G – 3 inches sideward.
• Connect point B and point G with a French curve shaping the neckline.
149
CITS : Apparel - Fashion Design & Technology -Lesson 13-24