Page 166 - CITS - Fashion Design Technology - Trade Theory
P. 166

FASHION DESIGN & TECHNOLOGY - CITS




               Fig 2






           •  Add 1/2-inch seams.
           •  Mark button placement in centre of extension.

           •  Centre buttonhole 3/4 inches from edge (see Chapter 16 on button placement).
           •  Cut from the paper. (Fig 3)

              Fig 3






           •  Unfold cuff pattern. Add grainline, straight or crosswise. (Fig 4)

              Fig 4









           Self-Faced Cuff
           •  Develop cuff using general instructions.
           •  Cuff can be designed with square corners or curves (broken lines). • Cut four pieces to complete the set.
              (Fig 5)
            Fig 5





           French Cuff (Used with Cufflinks) One-Piece Cuff
           •  Fold paper lengthwise.

           •  Square a 4-inch line from fold equal to twice the cuff’s width.
           •  Draw parallel line 8 1/2 inches long. Mark for notch and add 1-inch extension to both ends of the cuff. Connect
              ends.
           •  Mark for button holes.
           •  Add seams and grainline.
           •  Cut from the paper. (Fig 6)
              Fig 6










           Two-Piece Pointed Cuff
           •  Develop cuff on open paper, using instructions for one-piece French cuff (Fig 5).


                                                           153

                                CITS : Apparel - Fashion Design & Technology -Lesson 13-24
   161   162   163   164   165   166   167   168   169   170   171