Page 170 - CITS - Fashion Design Technology - Trade Theory
P. 170
FASHION DESIGN & TECHNOLOGY - CITS
Fig 17
Measurements Needed
Centre back neck: __________________
Centre front neck: __________________
Total: __________________
• Square a line in the centre of the paper. Mark and label the following locations:
A to B 3 inches (collar width).
B to C Total neck measurement. Label C.
B to D Centre back to shoulder. Mark for notch. (Fig 18)
Fig 18
• Square a line up from C.
• Mark E 1/2 inch from C.
• Draw a curved line from E blending with D.
• Square a line from A passing 1 inch or more from guideline C. Label F.
• Draw a line from E to F.
• Draw a grainline and cut the collar from the paper. (Fig 19)
Fig 19
StraightCollar
• Develop a straight collar using instructions given in Figures 1 and 2, except that the neckline edge is straight.
The collar’s width may be increased to 3 or 4 inches. (Fig 20)
157
CITS : Apparel - Fashion Design & Technology -Lesson 13-24