Page 175 - CITS - Fashion Design Technology - Trade Theory
P. 175

FASHION DESIGN & TECHNOLOGY - CITS




              Fig 2

















           •  Mark 1/4” below L, or for personal fit C.F. waist depth. Re-mark L.
           •  Draw curve waistline from L to O.

           •  Draw curve waistline from M to N. Completing Dart Legs Draw dart legs to new waistline. Equalize dart legs
              by extending shorter leg to match longer leg.
           G–R One-half of G–C.

           K–S One-fourth of K–C.
           G–T 1/3” on diagonal line.
           Draw curve, blending at X.
           K–U 1/3” on diagonal line.
           Draw curve, blending at X.

           R–V One-half of R–C less 1/8”.
           S–W One-half of S–C less 1/8”. (Fig 3)

               Fig 3

















           •  Square lines from V and W through length of the pant (crease line).
           •  Back: Draw hip curve from N to D.
           •  Front: Draw hip curve from O to D.
           •  Leg line: The back hem is generally 1 inch greater than the front hem. Follow suggested hem measurements.
              Make adjustments in the fitting.
           •  Mark 1/2” in from S and R and draw lines to hem marks.
           •  Inseam: Draw curve line from knee to S and R.

           •  Out seam: Draw leg lines from each hem mark, blending with D. Mark.
           •  Make waist band; see Figure 8. This completes the Classic foundation.
           Separate trouser and trace for the pleated design patterns.  (Fig 4)



                                                           162

                                CITS : Apparel - Fashion Design & Technology -Lesson 13-24
   170   171   172   173   174   175   176   177   178   179   180