Page 195 - CITS - Fitter Trade Pactical - Volume - 2

FITTER - CITS

Fig 9

Fig 10

• Use a screwdriver to tighten the hose- clips.
• Always use the correct size hose-clips (Fig 11)
• Turn on the pressure adjusting screw of the regulator to which the oxygen hose pipe is connected (Fig 12)
• Exert sufficient pressure to blow out dust or dirt particles if any are tapped inside the hose-pipe and then
release the pressure adjusting screw.
• Repeat the same for the acetylene hose also.

180

CITS : C G & M - Fitter - Exercise 53