Page 69 - CITS - Fitter Trade Pactical - Volume - 2
P. 69

FITTER - CITS





             Fig 1




















             Fig 2
















           During grinding: Take a blunt chisel for re-grinding. Chisels will become blunt due to use. For efficient chipping,
           chisels are to be re-sharpened regularly.

           Do not use cotton waste or other material for holding the chisel while grinding.
           Use only the face of the wheel and not the sides (Fig 3)

             Fig 3


















           Switch on the grinder.
           Hold the chisel edge parallel to the wheel surface; the body of the chisel must be at an angle of 30° in such a way
           as to get 60° wedge angle. (Fig 5)
           Rest the body of the chisel on the tool rest (A) (Fig 5) and allow the point to touch the wheel. (Figs 4 & 5)
           Keep the pressure as minimum as possible to prevent excessive heating of the cutting edge, (avoid blue colour
           i.e. annealing effect).







                                                           54

                                            CITS : CG & M - Fitter - Exercise 18
   64   65   66   67   68   69   70   71   72   73   74