Page 196 - CITS - Fitter Trade Practical - Volume -2

FITTER - CITS
Job Sequence

• If you ever need to disassemble a 2P025-08 Solenoid Valve,here’s a step by step pictorial.
The assembled valve looks like
• First thing to note is that the valve actually is two major components. The coil and the valve mechanism. You
can safety remove the coil even while the valve itself is connected to the water supply and under itself is
connected to the water supply and under pressure. Removal of the coil itself will not cause the water to flow
and will not cause the valve to leak water.

Remove the top nut to remove the coil
• For the following steps are disassembling the valve itself. For this you need the water turned off and even
then you will get a slight amount of water out of the system when you take the valve apart.

• Here,note the two screws holding the metal plate on. We will remove these to disassemble the valve.

• Now remove the two screws.

181

CITS : C G & M - Fitter - Exercise 89