Page 28 - CITS - Fitter Trade Practical - Volume -2

FITTER - CITS

• Chain drill, hacksaw, chip and remove the excess metal in part B as shown In Fig 6.
• File the excess metal in internal portion of part B to size and shape and check the size with vernier caliper.

Fig 6

• Cut and remove the excess metal in outer surface of the part B and file to size and shape as shown in Fig 7.

Fig 7

• Match part A and part B as shown in Fig 8.

Fig 8

13

CITS : C G & M - Fitter - Exercise 59