Page 244 - CTS - Sewing Technology - TP - Volume - 2-0

SEWING TECHNOLOGY - CITS

Fig 1

3 Turn on the power switch. (The POWER indicator on the operation panel will illuminate).
4 Depress the foot switch (2) to move the feed mechanism to the sewing start. (Fig 2)

Fig 2

5 Check that the needle is not touching the presser foot, and then while pressing the BOBBIN.WIND switch (3),
depress the foot switch (2) to start the machine. Keep depressing the foot switch (2) until the lower thread
stops being wound onto the bobbin. (Fig 3).

Fig 3

(Release the BOBBIN.WIND switch (3) after the machine starts operating. If you release the foot switch before
winding is completed, depress it once more while pressing and holding the BOBBIN.WIND switch (3))
The bobbin presser (1) will automatically return to its original position after a set amount of thread (80 - 90%
of the bobbin capacity) has been wound on.
6 Release the foot switch (2).
7 Remove the bobbin, hook the thread onto the knife (4), and then pull the bobbin in the direction of the arrow
to cut the thread. (Fig 4).

229

CITS : Apparel - Sewing Technology - Exercise 36 CITS : Apparel - Sewing Technology - Exercise 36