Page 369 - CTS - Sewing Technology - TP - Volume - 2-0

SEWING TECHNOLOGY - CITS

Wrong from right side of the original piece.
Fold and press jetting to form 0.5cm welts with their folds matching in the center of the opening. Baste along both
the seam lines. Stitch along basting at lower crevice and lock the seam. (Fig 9)

Fig 9

Turn the whole unit to the wrong side. Fold the original piece back. Turn the lower edge of jetting piece by 0.5cm
inside and top stitch with pouch piece. (Fig 10)

Fig 10

Take the prepared flap piece and insert into the pocket mouth and match seam line on top of the flap with the
seam line of upper welt and baste. Stitch at the upper crevice and lock the seam. (Fig 11)
Place the sample on the machine right side up. Fold back the side edge of the original piece and pouch piece to
expose tiny triangle at one end of the pocket mouth. Secure the end of triangle by double seam (care should be
taken that stitch must be very close to the cut). (Fig 12)

Repeat the process for the other end.
Now work from wrong side:

354

CITS : Apparel - Sewing Technology - Exercise 41