Page 366 - CTS - Sewing Technology - TP - Volume - 2-0
P. 366

SEWING TECHNOLOGY - CITS


            Skill Sequence No. 2


            Hip pocket with welt and flap


           Objectives : At the end of this exercise, you shall be able to:
           •  stitch hip pocket with welt and flap on back part.

           Procedure

           Place original flap pieces over each other. Right sides together. Place interlining piece over each other. Right
           sides together. Place interlining piece over it. Lay the flap paper pattern on the interlining piece, 1cm below the
           top edge and pin. (Fig 1)

                                      Fig 1















           Mark along the edges of flap pattern. Baste on marks’ leaving top edges. Remove pin and paper pattern. Stitch
           along basting, lock stitches al end.
           Cut the extra material from all the 3 sides leaving 0.75cm as seam allowance. (Fig 2)

                                      Fig 2
























           Cut the corners only from the interlining piece. (Fig 3)

           Turn the flap unit out maintaining the comer shape and press. Make top seam 0.5 cm away from the stitched
           edges. (Fig 4)
           Take pocket pouch piece With wrong sides together place the pouch piece exceeds 3.0cm above, the pocket
           mouth mark. Matching the center of both the pieces, baste along the mouth mark. (Fig 5)
           With right sides together, place both the jetting pieces on the sample piece along with pocket mouth mark right
           sides together.






                                                           351

 CITS : Apparel - Sewing Technology -  Exercise 41  CITS : Apparel - Sewing Technology -  Exercise 41
   361   362   363   364   365   366   367   368   369   370   371