Page 114 - CITS - Dress Making - TT - 2024

DRESS MAKING - CITS

Join piece (J) :
• Change direction
- Click inside a piece / point to combine piece • Delete Seam
• Move pieces along side only
- Click inside the second piece
Ok Cancel
- Give OK
(i.e) where the piece should be joined at top or bottom side

Change Direction → If want to change direction, Click √ Change direction
Delete Seam → If you click delete seam → √
(i.e) If the yoke and back part has seam in it and you want to join the yoke & back part without seam,then this
option delete seam is used.
Cut piece:
- First put an Internal Line, (e.g) Princess line , frock yoke

- Select the Cut Piece tool
- Select the Internal Contour
Cut a piece along internal: (Ctrl + Shift + C)
- Cut by Internal contour

- If the internal line is Zig-Zag or other shape, then Select this tool Cut a piece along internal
- Select the Internal line & cut
- Deselect the tool
- The piece comes separate
√ Seam - If you want cut piece with seam, Click this option.

Build piece (B):

- Select the piece part first / It turns green
- Again Click inside the piece – The piece can be moved separate
- (i.e) It creates a new piece of the selected shape / pattern.
Trace segment:(Ctrl + B)
- Select the tool to trace a piece / pattern

- Trace the line of the new piece / Select the segment clockwise.
- Finish;
- Deselect the tool – Now move the piece- Now the piece is traced.
Built piece zone

- Creates a Separate Zone.
Trace piece (Ctrl + Shift + B):
- If two piece in a pattern overlaps and to remove the overlapping portion separately.
This Trace piece tool is used.
Fold out
If the pieces is in fold. To remove the fold

- Select fold out tool and click the fold line.
- Automatically the piece gets Unfold.

99

CITS : Apparel - Dress Making - Lesson 8 & 9