Page 115 - CITS - Dress Making - TT - 2024

DRESS MAKING - CITS

Fold in :
It is used to fold and see the yoke forward fold.
First Select the grade point of yoke forward
- Select Piece Contour Segment

- Select the Second Point for fold.
Fold onto point :
It is used to fold the piece onto the selected point.
- Click a point on external / contour to fold
- Click a point on internal / contour to fold onto.

From the selected first point it folds to the selected second point.
Patternmaking 2D software tools
(Insert & Edit Tools)
Insert

Tool Name Shortcut Description
Add Point on Contour O Adds a point along a line.
Add Point Shift +O Adds a point outside of a contour line; the contour
line will shift towards the new point.
Set Piece/Contour
Start Point Sets selected contour point as the start point of
the piece.
Add Reference Point Adds a point with None attribute to be used as a
reference point.
Add Relatively Point
or Notch Ctrl +Shift+A Adds a point or notch relative to the selected point
Add Notch N Adds a notch on a segment.

Add Notch On Point Shift+N Adds a notch on a corner point to place it on the
previous/next segment.
Add Points to All
Notches Ctrl +Shift+N Adds a point to any existing notch
Grade Notch Displays and sets grading of a single notch
relative to a selected grading point for all sizes.

Add Seam S Adds/changes seam allowance.
Basic Seam Creates a basic seam for the same pieces.
Remove Seam Shift+S Removes the seam allowance from the entire
piece.
Round Corner on
Seam Creates a round seam corner

Create Arc on Seam Creates an arc seam
Create Wave on Seam Creates a wave seam
Cut Seam Angle Customizes a corner for the seam allowance.
Copy Seam Copies the seam from a selected segment.

100

CITS : Apparel - Dress Making - Lesson 8 & 9