Page 224 - Electronic Mechanic - TP - Volume - 2
P. 224
ELECTRONICS MECHANIC - CITS
Remove the ground screw and connect the ground cable. Retighten the screw to a max. torque of 3 Nm.
Thermocouple connection
The thermocouple must be connected to the immersion heater using a thermocouple cable type K.
Connect the thermocouple cable type K to the female socket on the immersion heater.
The thermocouple cable must be connected to the control cabinet and should cut off the power to the immersion
heater if the sets points are exceeded
Result: Thus, monitor and check of various parts, dismantling, installation and wiring has been completed
successfully.
207
CITS : E & H - Electronics Mechanic - Exercise 175
