Page 285 - Electronic Mechanic - TP - Volume - 2

ELECTRONICS MECHANIC - CITS

EXERCISE 198: Construct and control a double acting

cylinder by adjust the pressure as per the
requirements

Objectives

At the end of this exercise you shall be able to
• select the components to construct and control a double acting cylinder by adjust the pressure
• construct the circuit on trainer board as per the diagram
• check the function of the circuit.

Requirements

Tools/Materials
• Pneumatic trainer board - 1 No. • 5/2 DC single solenoid valve - 1 No.
• Digital multimeter with probes - 1 No. • Push button switch - 1 No.
• Regulated DC power • Pressure Switch - 1 No.
supply 24V/2A - 1 No. • Relay - as reqd.
• Pneumatic Source - 1 No. • PU Tube - as reqd.
• FRL - 1 No. • Connecting cables
• Double Acting Cylinder - 1 No.

Procedure

TASK 1: Select the components to construct and control the double acting cylinder by adjust the
pressure

1 Identify the components using ISO 1219 symbol.
2 Check the DC supply by using multi meter

TASK 2 &3 : Construct the circuit and control the double acting cylinder by adjust the Pressure

A Pneumatic Connection
1 Connect the Compressor to the FRL
2 Set the FRL for 6 bar
3 Connect the FRL to the Manifold

4 Connect input port (Port No.1 or P) of the 5/2 Solenoid valve to the Manifold.

268