Page 154 - CITS - Fashion Design Technology - Trade Theory
P. 154

FASHION DESIGN & TECHNOLOGY - CITS




           F–N Across chest, plus 1/4”. Square up 4”.
           Label O.
           Armhole shape: Draw 1-1/8” diagonal line from N.
           Draw a 3/4” wide extension line parallel with the center front. Cut the pattern from paper (a).
           Front left: Turn front pattern over and trace.

           Draw a 1-1/4” parallel line to the extension. Mark
           fold line and notch 3/4” out from center (b).
           Cut the pattern from paper.( Fig 3 b)

              Fig 3b





























           Yoke
           Trace the front and back foundation patterns.
           Back

           •   Mark 3” down from center back neck and square across the pattern for yoke line. Below yoke line, add 1 1/4”
              for pleat (if desired). Mark location of the pleat.
           •   Cut the pattern and separate the yoke.
           Front

           •   Draw a line 1 1/4” down from the front shoulder tip and draw a parallel line with shoulder. To complete the yoke,
              cut pattern and separate up-per part (b).
           •   Add 1/2” seam to the lower pattern and cut.(Fig 4)




















                                                           141

                                CITS : Apparel - Fashion Design & Technology -Lesson 13-24
   149   150   151   152   153   154   155   156   157   158   159