Page 25 - CITS - Fashion Design Technology - Trade Theory

FASHION DESIGN & TECHNOLOGY - CITS

• Connect 6 to 15B
• Fold 22 over 21

• Connect 8B to 10B
• Measure 12B and 15B (side length)
• Side length of back and front bodice should be equal. Fig 3
Drafting the back and front basic pattern
• 2-8F =1/2back neck or 6.5 to 7.5 cm

• 2-9F=1/2 shoulder. Square down 9F
• 9F-10F= 4.5 cm. connect 8Fto 10F
• 4-11f = ½ shoulder minus ¾ inch (2cm).
• 812F = 1/4bust +1 inch (2.5cm). Connect 10F, 11F, and 12F with a French curve.

• 5-13f = ½bust point width.
• 7-14F =1/2 bust point width. Connect 13F to 14F
• 7-15F= ¼ waist+4cm. connect 12Fto 15F with dotted line
• 14F-16F =3/4 inch (2cm).
• 14F-17F =3/4 inch (2cm).
• 13F-18F =5/8 inch (1.5cm). connect 16F-18F, 17F to 18F

• 12F-19F =31/5 inches (8cm).
• 19F-20F= difference of 6 and7
• 21- Middle of 19F and 20F. connect 21Fand 13F
• 13F-22F = 5/8 inch (1.5cm). Connect 19Fto 20F to 22F (side dart)

• Fold 20F over 19F
• Connect 12F and 15F with a straight line
• Fold 16F over 17F
• Connect 7F to 15F
• 12F-15F with a dart closed = 12B -15B of back bodice (side length) (Fig 4)

Fig 4

12

CITS : Apparel - Fashion Design & Technology - Lesson 1