Page 166 - CITS - Fitter Trade Pactical - Volume - 2

FITTER - CITS

• Drill Ø 3 relief holes as shown in drawing.
• Chain drill holes for parting off excess material from part - 2 .
• Cut and remove excess material using web chisel and ball pein hammer.

• File steps to size and squareness using safe edge file different grades .
• Check the size with vernier caliper .
• Match part 1 and 2 .
• Finish file on part 1, 2 and de - burr in all the surfaces.
• Maintain thickness 9mm.

• Use oil in all surfaces and presrve for evaluations.

151

CITS : CG & M - Fitter - Exercise 47