Page 127 - CTS - Mechanic Diesel - TP

MECHANIC DIESEL - CITS

12 Slide the new hoses into the position on the fittings with new clamps.
13 Tighten the clamps (6mm from the end of the hoses).
14 Refill the coolant in cooling system by using the funnel

15 Start and run the engine for few minutes.
16 Check the hose connections to make sure there is no leak.
17 Stop the engine and allow to cool
18 Open the radiator cap
19 Check the coolant level, top up if necessary.

110

CITS : Automotive - Mechanic Diesel - Exercise 7.1