Page 201 - CTS - Mechanic Diesel - TP

MECHANIC DIESEL - CITS

TASK 3: Leak test
1 Press the SELECT key (Fig 1) once in the stand-by mode to select the Leak Test mode
2 If the message ‘Leak test’ is indicated on the indication window as shown above (Fig 2) mount the leak test
cap on the front side of the probe.
3 Press ENT key. The pump operates and the count values decrease by 1 from 20 during the 20-second leak
test
4 If the test turns out normal without any leak after 20 seconds, a message is indicated as ‘PASS”. If the leak is
identified, the message is indicated as ‘FAIL’.

Fig 1 Fig 2

TASK 4: Selection of fuel
1 Select fuel. Use, keys until it indicates the fuel to select.
2 Press ENT key to setup the selected fuel.

3 For Example, If the “LPG” fuel is selected, the window indicates as shown in the below (Fig 2)

Fig 1 Fig 2

TASK 5: NO X setup
1 Press select key for eight times in standby mode
2 Key changes display to YES or to NO.
3 Select YES for NOX display mode, NO for non- NOX display mode, then press ENT

184

CITS : Automotive - Mechanic Diesel - Exercise 12.1