Page 265 - CTS - Mechanic Diesel - TP

MECHANIC DIESEL - CITS

Full load stop screw
Screw in full load stop screw into governor cover temporarily until it engages lock-nut (Fig 18)
Guide lever
Insert guide lever with fulcrum lever guide sleeve assembly and shackle
Insert lever shaft into governor cover partially to that it engages with one leg of guide lever.

Fig 18

Fig 19

Fig 19 Assembly aid bush for pressing bearing bushes into governor cover

Swivelling lever
Insert swiveling lever shafts into governor cover bearing bores. Insert bearing bushes with rubber rings from
outside into governor cover. Using two assembly aid bushes (Fig 19) firmly press bearing bushes into position so
that the grooves for retaining rings become accessible. (Fig 20). At this stage, insert retaining rings into position
(Fig 21).
Fig 21
Fig 20

Install rubber ring and select washer such that the rubber ring is not loose or subjected to undue pressure or the
bearing area of control lever on swiveling lever shaft flat is not reduced. Fix control lever with screw washer and
spring washer . Check the axial clearance and free movement of swivelling lever by moving the control lever.
The axial play of the swivelling lever can be adjusted by selecting suitable thickness of washer
Tension lever
Hook the governor spring to swivelling lever and to tension lever. Install tension lever from upper side of governor
cover, pushing it underneath the swiveling lever (Fig 22).

248

CITS : Automotive - Mechanic Diesel - Exercise 15.3